Toggle Pads are used to clamp parts with uneven or angled surfaces. Because the pad swivels 10 degrees in all directions, it is self aligning against the work piece surface. Steel pads are case hardened with a yellow zinc finish. Delrin pads are used on soft surfaces to prevent marring.
| Steel Body – Smooth Pad Steel & Delrin Smooth Toggle & Swivel Pads, Inch |
|
 |
|||||||||||||||||||
| Steel Body and Pad P/N |
Steel Body and Delrin® Pad P/N |
Thread (A) |
Max Load Steel Pads (lbs) |
Max load Delrin® Pads (lbs) |
Hex Size (B) |
Closed Height (C) |
Pad Dia (D) |
Thread Depth (E) |
|||||||||||
|
|||||||||||||||||||
| SP-1 | SP-1D | 1/4-20 | 3,900 | 360 | 1/2 | 5/8 | 5/8 | 5/16 | |||||||||||
| SP-2 | SP-2D | 5/16-18 | 5,900 | 360 | 9/16 | 3/4 | 11/16 | 3/8 | |||||||||||
| SP-3 | SP-3D | 3/8-16 | 6,400 | 570 | 5/8 | 13/16 | 3/4 | 3/8 | |||||||||||
| SP-4 | SP-4D | 1/2-13 | 7,000 | 570 | 3/4 | 15/16 | 7/8 | 7/16 | |||||||||||
| SP-5 | SP-5D | 5/8-11 | 10,000 | 1,000 | 7/8 | 1 | 1 | 7/16 | |||||||||||
| SP-6 | SP-6D | 3/4-10 | 13,500 | 1,300 | 1 1/16 | 1 11/32 | 1 1/4 | 5/8 | |||||||||||
| SP-7 | SP-7D | 1-8 | 18,750 | 1,570 | 1 3/8 | 1 53/64 | 1 5/8 | 13/16 | |||||||||||